TeleFlow Step 0016
From TeleFlow
Transfer Call
Connects two calls together, using transfer capability of your telecommunications circuit.
At present this step only works with ISDN circuits that are configured to provide the 2B-Channel Transfer capability (sometimes referred to as "release link transfer").
Contents |
Properties
Other port's call reference number: In order to connect two ISDN calls together, you need to use the call reference number for each call, as provided by your ISDN circuit. TeleFlow knows the call reference number for the current port, however, you need to supply the reference number for the other port.
To obtain the call reference number, capture the value from the @SYS_CALLREF system variable.
Action Steps
None.
Supported Telephony Hardware Platforms
Special Hardware Considerations
In order to use the Transfer Call step, your application must be connected to a 2B-Transfer capable ISDN circuit.
Related Steps
