Post new topic Reply to topic  [ 2 posts ] 

Board index : TeleFlow Forums : NMS Communication Boards

Author Message
 Post subject: NMS HMP
PostPosted: Wed Jul 11, 2012 4:03 pm 
Offline

Joined: Wed Jul 11, 2012 3:55 pm
Posts: 1
Hi,

We have a software that was designed to work with NMS Boards. I'm trying to use NMS HMP but I cannot get the virtual board to start.

I installed the NMS PacketMedia and applied the free license.

The server has no NMS board. I have added the following to oamsys.cfg:

Code:
[Name0]           
Product = CGHOST
Number  = 1       
Bus     = 0
Slot    = 0
File = cghost.cfg


And cghost.cfg is:

Code:
EnableVAD  = YES
DynamicRecordBuffers = 6
AutoStart  = Yes


when I run oamsys, I get the following:
Code:
oamcfg -p
Stopping all boards.
Wed Jul 11 19:00:05 - OAMEVN_STOPBOARD_REQ INFO Board 0 "Name0"
Stop board in 150ms.
Wed Jul 11 19:00:05 - OAMEVN_ALERT ERROR "cg6kpi.bpi"
Cannot stop board Name0 - board is busy
Wed Jul 11 19:00:05 - OAMEVN_STOPBOARD_DONE OAM_REASON_FAILED ERROR Board 0 "Name0"
Failed to stop board.

oamcfg -d
Deleting all boards from database.
Can't delete all boards, OAMERR_ACCESS_DENIED.


Can someone help me with this? I think that I'm missing something in the cghost.cfg

Thanks.


Back to top
 Profile  
 
 Post subject: Re: NMS HMP
PostPosted: Tue Oct 02, 2012 2:39 pm 
Offline
Site Admin

Joined: Wed Dec 31, 1969 5:00 pm
Posts: 329
Location: Vancouver, BC
Sorry this post was somehow missed. :oops:

It's probably too late for this response, but in case you still need an answer and for those who may stumble on this thread...

You should set
Code:
Number = 0

in your oamsys.cfg file. The "board number" is 0-based, and so the first board should be board #0.

Then, there are two other things to watch out for. Firstly, you must be the administrator of the local machine in order to run the oamsys utility.

Secondly, if you had previously run oamsys in error, there is no way to get rid of an invalid board reference (that I know of). You must remove the Natural Access software and install it again. One sure way to get into this state is to run oamsys immediately after installing Natural Access, before making any changes to the config files. The default configuration is to boot a CG board. Once you start attempt to start a board that is not there, NA will never let you "stop" it.

Lastly, Dialogic has dropped support for the Natural Access PacketMedia HMP, which is a shame because it is a good product. As long as you have licenses for it, though, it will work just fine with TeleFlow.


Back to top
 Profile WWW 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

Board index : TeleFlow Forums : NMS Communication Boards


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Style by Midnight Phoenix & N.Design Studio
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.